ABS Front Left Speed Sensor For ToyotaTundra Sequoia 2007-2015
Specification:
Stable performance & Durable.
Replace Part Number: 89543-0C020, 895430C020
Placement: Front Left
Color: Black
Size: as the pictrue show
Fit:
MakeModelYearTrimEngineImportant vehicle option details
ToyotaSequoia2008-2014 Limited, Platinum, SR5 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60,
UCK65, UPK60, UPK65, USK60, USK65
ToyotaTundra2007-2014 Limited, Platinum, SR5 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L,1GRFE, 1URFE, 2UZFE, 3URFBE,
8 Cyl 5.7L
Installation method:
1) wheel speed sensor wiring bracket is mounted to the control arm and the bottom plate of the vehicle.
2) wheel speed sensor is mounted to the steering knuckle. After the wheel speed sensor wiring bolts to 10lbf ft stent (16N - M), the festival will turn to tighten the fixing bolt to 16 LBF - FT (22Nm).
3) wheel speed sensor wiring connector pass through the hole in the floor, and the joint wiring connector connect again after receiving the suspension, tighten the plastic clip.
4) check the wheel speed sensor gap: (1) Check whether there is damage to the wheel pulse signal generator with the teeth. (2) Rotating drive shaft with
hand, measuring gap between wheel speed sensor and a pulse generator wheel. the drive shaft is to rotated a circle, check the gap. The standard clearance is 0.02-0.04in (0.5-1.0mm). (3) If the gap exceeds the standard value, check the steering knuckle and pulse generator wheel have been out of shape.
5) Install the rear wheel and fall under the vehicle.
6) To tight the wheel nuts to 80 LBF - FT (110N - M).
7) picking up the battery negative connection.
8) Turn the ignition switch to "on" (open) position, but do not start the engine. Open the anti lock braking system indicator. Start the engine and check whether the indicator closed. If the engine rotates, flashing lights, is not bright or not, it must be diagnosised about fault of system.
9) To install the trunk lid once again.
Packing included:
1 x Front Left Speed Sensor
Note:
1.No Instructions Included.
2.Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
3.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
4.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
