INSTRUCTION MANUAL 1. Introduction this product is made with high quality and very resistant materials. It has a spring mechanism which allows the hose to rewind automatically. It also has a device that controls the length of hose that you pull out and can turn 180 degrees on its axis. It is advisable to install it in a place from which you can reach a greater area. 2. Installation • It is advisable for the hose to be installed near a source of water. For large areas it is more convenient for it to be installed in the middle of the garden or near the work area, that way the hose can easily reach all parts of the garden. • Connect the hose to the tape • The mounting bracket can be installed on a brick wall. The main point must be installed to suit the water • The most appropriate place is on a wall in horizontal position, approximately 1.25 m from the ground. • The connector piece has three holes, which must fit the corresponding screws that they go with (you can also fix the three holes with your own screws). Each screw must have its washer. You can also buy some clamps so that it can move more easily when in use. 3. Using the hose The reel comes with a quality resistant hose. • Prevent sun light from heating the hose, mainly in areas of high temperatures and high water pressure as this can damage it and then make it difficult for it to rewind properly • It is advisable to have the water off before starting to use the hose • Don't let the hose come in contact with any substance containing acetone, caustic products lactic acids, etc.
