Manually pre-set the run time d frequency of watering and the water timer will automatically switch on and off after serving water to your plants through a drip irrigation line This package contain only one GreenAge water timer. Please also consider buying 1) Reducer 2) Screen Filter3) Y adapter and 4)16mm Female thread coupling to complete the perfect fixing of the head unit Please watch -Automatic Micro Drip Irrigation by GreenAge- on YouTube. Please note: For the initial set up, you have to wait until the frequency that you have set to see the timer functioning for the first time. for example, if you set it for one hour frequency with a 5 minutes run time, then you have to wait for one hour to see the timer working PROGRAMMING THE GreenAge WATER TIMER Pull out the battery cover and install 2 AAA batteries - Always use new and branded batteries When the battery is installed, the timer will make a motor sound twice Initially the FREQUENCY knob will be at the RESET position and the RUN TIME knob will be at the ON position. Timer is ON now and the water will flow if keep you fix it the timer in the supply line To stop the flow of water, rotate the RUN TIME knob to the OFF point You will hear a single motor sound and the water will stop flowing SETTING UP THE TIMER Be it for setting up or stopping the timer, you always have to keep the FREQUENCY knob at the RESET position and THE RUN TIME knob at the ON position. To set up the desired frequency and run time , please follow these steps: 1) Keep the FREQUENCY knob at the RESET point and RUN TIME knob at ON point 2) Rotate the RUN TIME knob and keep it at the desired minutes, say 5 minutes 3) Rotate the FREQUENCY knob and keep it at the desired hour, say 3 hours (Please do steps 2 and 3 one by one without time delay) Now you will hear a single motor sound and that saves your desired frequency and run time. At the above settings, timer will function once in every 3 hours and will serve water for 5 minutes
