Technical Properties
• Time delayed range 5s ; 15min
• Diameter of the floor detection area 12 m
• Protection index IP IP55
• Brightness measurement range 5/1000 Lux
Product presentation and operating principles:
This detector allows automatic control of a light source for a defined length of time when a movement is detected in the surveillance zone.
Settings and Test :
The detectors have 2 modes of operation: Fixed time and Control by timer.
Power supply
The detector switches the light on for 40 s. After 40 s, it activates the Normal mode`
Testing and validating the detection zone :
• Put the potentiometer on Test mode. The Test mode is available for 3 min. Every movement detected switches on the light for 1s. After 3 min without detection of movement, the product returns to normal operation.
Limiting the detection zone
• You can limit the detection zone by tilting the head.
“Normal” operation (on/off) :
• The lighting is activated whenever the level of luminosity defined by the potentiometer 2 is judged to be insufficient and a movement is detected.
• After detection, the light stays on for the length of time predefined by the potentiometer 1. The fixed timing is reset after each detection. Please note: when the potentiometer is on “auto test”, the settings are predefined.
Mounting
Surface-mounting or ceiling-mounted :
- fix the wall plate using the screws provided
- connect the wall plate terminal block (see cabling plans in annex)
- fully insert the detector on the wall plate
- tighten the screws to ensure the product is sealed.
For corner fixing, the wall plate is to be fixed between the accessory and the detector. Cable entry (breakable partitions) are possible:
- by the back (box mounting) or by the bottom.
