Assembly Step 1: Remove the 4x allen bolts holding the top cover in place using the allen key supplied Step 2: Place the Handle bar centrally in the top cover groove, replace the top cover and 4x allen bolts and tighten. Step 3: Placing the Pogo body on a flat surface, position the foot pegs at the base of the pogo body with the foot grips facing upwards Using the 4x allen bolts supplied loosely tighten into place. Before finally tightening these bolts, look down the length of the pogo from the top and check that the foot pegs are in line with the handle bars. When in the correct orientation tighten down the 4x allen bolts to hold the foot pegs in place. Step 4: Make a final check of all the bolts ensuring they are tight prior to use. You are now ready to go. Important Disclaimer: Monkiegears.com is not liable for incidental or consequential loss or damage due directly or indirectly by the use of this product. Always wear the correct protective equipment when using your Pogo, a safety helmet (insuring that the chin strap is adjusted and fitting correctly), knee pads and elbow pads. Make sure all your friends are instructed on the proper way to use your Pogo Never use your Pogo with bare feet, always wear shoes or trainers " and " Key Feature 2 : General warning Using a Pogo is a great fun and an excellent way to master a new skill and keep fit. But like any other moving product it can also be a dangerous activity which may result in injury or even death if you allow the Pogo to get you into a dangerous situation. Use this product at your own risk and use common sense when riding, and follow these tips to reduce your risk: Check that that the rubber tip is firmly in place prior to use, if it is loose or damaged do not use the Pogo and replace the part. Always use the correct protective equipment, helmet (make sure your chin strap is securely buckled), knee and elbow pads. Use correct shoes or trainers Select the location for riding carefully; pick a smooth dry surface away from any motor vehicles Avoid wet sand, grass, gravel or leafy areas or have hazards such as drainage grates or sudden surface changes. Only allow riders with the appropriate weight range for your particular Pogo model to use it. A child's weight does not necessarily indicate that the product is appropriate for them to maintain control of the Pogo stick. Children should always have the correct adult supervision when using this product. Parents should always determine that the product is appropriate for the specific child's maturity, skill and ability. " and " Key Feature 3 : Good Practices for safe Pogo use Pogo's are designed for use on solid, flat, clean and dry surfaces, such as pavements level ground free from debris like rocks and gravel. Use on wet or uneven surfaces seriously contributes to possible accidents and impairs safe landings. Never use in poor visibility or at night. Always consider the risk of damaging surfaces such as carpet or flooring by use of the Pogo indoors. Always hold the Pogo in an upright, vertical position when jumping, and do not push the Pogo away from you as this can affect your balance, landings and may damage the Pogo. Direct parental supervision is required at all times. The product should only be used in appropriate areas and controlled environments away from potential traffic hazards, and avoiding causing distress or nuisance to other members of the public. Getting set to Pogo Always wear the correct protective equipment when using your Pogo, a safety helmet (insuring that the chin strap is adjusted and fitting correctly), knee pads and elbow pads. Never use the Pogo barefoot or in lose fitting foot ware, trainers or shoes should be used at all times, making sure that shoelaces if appropriate are tied and will not get tangled in the pogo foot pegs. General Maintenance Your Pro Pogo is a sealed unit and does not require any additional lubrication or maintenance during the life of the product. You should always carry out a safety check prior to use, being sure that all bolts are correctly tightened and the Pogo body, handle bars and foot pegs are in good condition and not damaged in any way. Always keep your Pro Pogo free from grit and dirt by wiping your Pro Pogo down after use with a soft cloth
