Uses the TGAM1 module
Automatic wireless pairing
Single AAA Battery (Not included)
8-hours battery run time
Bluetooth v2.1 Class 2 (10 meters range).
Static Headset ID (headsets have a unique ID for pairing purposes)
MATLAB, Android and iOS support
UART Baudrate: 57,600 Baud
Raw-Brainwaves
Processing and output of EEG power spectrums (Alpha, Beta, etc.)
Processing and output of NeuroSky proprietary eSense meter for Attention & Meditation
EEG signal quality analysis (can be used to detect poor contact and whether the device is off the head)
Specifications
CPU X
TGAM Module (ASIC Chip)
Power
1.5V AAA Battery (Not included)
Power used in board 3.3V & 1.5V
Connectors
1 Nos. Electrode connector
1 Nos. Power Connector
1 Nos. Uart Connector
Think Gear // TGAM Module Features
Directly connects to dry electrode (as opposed to conventional medical wet sensors)
One EEG channel with three contacts: EEG; REF; and GND
Improper ?t detected through “Poor Signal Quality” warning from ASIC to reset if off the head for four consecutive seconds, or if it is receiving a poor signal for seven consecutive seconds
Advanced altering technology with high noise immunity
Low power consumption suitable for portable battery-driven applications
Raw EEG data output at 512 bits per second
Raw brainwave signal
Processing and output of EEG power spectrums (Alpha, Beta, etc.)
Processing and output of NeuroSky proprietary eSense meter for Attention and Meditation
EEG/ECG signal quality analysis (can be used to detect poor contact and whether the device is off the head)
Eye blink detection
512 bits per second sampling frequency
3-100 Hz frequency range
ESD Protection: 4kV Contact Discharge; 8kV Air Discharge
Max Power Consumption: 15mA @ 3.3V
Operating voltage 2.97 ~3.63V
Dimensions (Max) 2.79cm x 1.52cm x 0.25cm
Weight (Max) 130 mg
Power Supply
To power on the Mindwave Mobile headset, slide the switch to the ON (middle)position. When held past the ON position for 3 seconds and then released, the headset will enter Bluetooth pairing mode. If instead the switch is held past the ON position for 6 seconds, the headset's pairing memory will be cleared.
While the Mindwave Mobile headset is powered on, the LED light on the side of the headset will be turned on. If the Mindwave has a low battery, the LED light will ash to indicate low battery status.
To turn the Mindwave Mobile off, slide the switch back to the OFF position.
BLUETOOTH
Bluetooth pairing
"Pairing" is when your computer/tablet/phone remembers your Mindwave Mobile headset, and your Mindwave Mobile headset allows that computer/tablet/phone to connect to it. Note that this is different from"connecting", which is when the computer/tablet/phone is actively sending or receiving data and information.
You must first pair each of your computers/tablets/phones to your Mindwave Mobile headset in order for them to connect to each other. To do so:
Put the Mindwave Mobile headset into "Pairing Mode" by holding the On/O? switch past the "On" position for 3 seconds.
Important: Release the switch when the light starts ashing blue. If you continue holding for more than 6 seconds, the Mindwave Mobile headset will clear all previously remembered pairings.
Refer to the Bluetooth pairing instructions that came with your iOS, Android, PC, or Mac device to search for and pair to the Mindwave Mobile headset.
If prompted, enter "0000" for the authentication key.
Your Mindwave Mobile headset can "pair/remember" up to 3 computers/tablets/phones at the same time.
Bluetooth Connection
Depending on your computer/tablet/phone, it may automatically connect to the headset whenever an application needs to use the headset. If your Bluetooth software does not automatically connect when an app is started, please refer to the Bluetooth connecting instructions that came with your iOS, Android, PC, or Mac device to manually connect to the headset before running your apps.
Serial/COM Port Name or Number
Some games and applications will ask for you to enter the serial COM port name or number for the game or application to connect to the headset. Use the Bluetooth software on your computer/tablet/-phone to determine the COM port name or number that your Mindwave Mobile has been assigned to.
Warranty
30 days warranty from date of invoice against manufacturing defects only on Hardware.
Returns
Returns will only be accepted if the unit is defective. The customer will have to get the RMA number from support@neurosky.com. A new replacement unit will be given against the RMA number only after the defective unit is received intact back from the customer.
